|
So what
is the process? Let's just take it step by step and try to cover
all questions you may have.
Step
1 - Choosing a color. Normally the hardest part of the
process. Stone price is based on movement and coloration.
Step
2 - Once you have a color selected we sit down
with your plans and calculate your square footage. Our prices
always include template, fabrication and install. We will also
go over sink and oven selection, edge profile options,
backsplash options and any other special items required by your
project. We can do this at your home or our office, whatever
suits your schedule and needs better.
Step
3 - Once color and price is determined we require a 50%
deposit to hold material.
Step
4 - New cabinet install - Once cabinets are installed
we will come make a template. A template is a design of your
countertop we construct so each cut is accurate. Creating a
template typically takes a couple of hour.
Step
4 - Cabinet tear out - We will tear your old countertops out
or await for you to have them removed. Once it is accomplished
we create the template as explained above.
Step
5 - Fabrication - Using the templates we created we begin
fabrication of your countertop and edge. We also perform sink
cut outs and have the top completely prepped for install.
Step
6 - Installation - Once fabricated we return to install your
countertop, sink and cook-top where needed. An average kitchen
typically takes a day and a half. After installation we apply a
sealer application.
Note:
It is very important for us to have your sink prior to
fabrication. It is also important to have your faucets on site
the day of installation.
The entire process from Step 4 to Step 6
typically takes 5 - 7 days. Over the previous 15 months our
production average has been 5 days from template to install.
|
